From: Cees Tool (zbsf.iwmnk@crimea.ua)
Date: Wed Jan 31 2001 - 02:39:13 EET
Hi Stuart and All,
Yes I have seen the problem now too.
I had just tried to run the 1.09 client and did not see any problem as I
upgraded from the last version. But when I selected the "Config" menu then
the "password" of all the entries was set to "3286".
So probably some data is set on the wrong position. And as you do not have
the "port" in your new/clean ini file, I suppose the "port" part is not made
at all and the data for the port-part is in the password part.
You can manually edit the fbbW.ini file by adding the password in the ini
file and add a port-line.
You should change your ini file as follows :
[Remote 0]
Name=g7jyf
Host Name=44.131.248.128
Callsign=g7jyf
Password=your-password-here
Port=3286
AutoConnect=1
(leave the rest of the ini file as it is)
But after this manual-change : do NOT use the Config option !! You will
loose all passwords again.
All other menu's and options seem to work normally here.
73
Cees - PA3AES
_______________________________________________
xfbb maillist - gsbofhi@groupey.com
http://www.f6fbb.org/mailman/listinfo/xfbb
This archive was generated by hypermail 2b30 : Wed Jan 31 2001 - 03:22:11 EET