Re: usage of f6fbb via telnet port

From: Rodolfo Brasnarof (glxh.pnlai@mail.dy.fi)
Date: Fri Apr 23 2004 - 09:23:18 EEST

  • Next message: Günther Montag : "Fwd: Re: usage of f6fbb via telnet port" 

    ---
On 22 Apr 2004 at 15:49, Günther Montag wrote:

    > Hello friends,
> i am working at connecting a ham program to f6fbb.
> I want to open a bbs prompt (something like a msg "here is fsfbb.. enter "H" 
> for help... "M" to see your mails... and so on) via telnet, e.g. by 
> "telnet localhost 3286" (3286 example for port number.
> The fbb doc says there is a way to have a telnet port besides tnc etc.
> Is it possible this way, and how to configure? pse tips! tnx!

    Yes, you can have telnet access to fbb. De default port is 
6300 but of course you can use another one.

    Notice that telnet access is by default in read only mode.

    In my personal experience, for example to give access to fbb 
from linuxnode on the same machine, telnet access was not 
fine. I used axip instead.

    If you still want telnet access, you have to add 1 tnc and 1 
port. Then add a line like this to the ports:

    #Com Interface Address (device)   Baud
2    9         189C               0

    and something like this to the tncs:

    #TNC NbCh Com MultCh Pacln Maxfr NbFwd MxBloc M/P-Fwd Mode Freq
2    8    2   0      250   2     1     10     00/60   TUWR  Telnet

    The address in the port line is the tcp port where to listen 
in hex (6300 in the example).
-
To unsubscribe from this list: send the line "unsubscribe linux-hams" in
the body of a message to zngis@brunnet.net
More majordomo info at  http://vger.kernel.org/majordomo-info.html

    This archive was generated by hypermail 2b30 : Fri Apr 23 2004 - 10:11:38 EEST