Re: Problems with uscc and kernel 2.6.0-test11

From: Jean-Luc Coulon (f5ibh) (fvitlzq@imt-mrs.fr)
Date: Thu Dec 11 2003 - 18:00:25 EET

  • Next message: David Quental: "Re: Re : Problems with uscc and kernel 2.6.0-test11"

    Hello,

    I've the same problem with a DRSI ISA card. it uses the scc driver.
    With previous versions (I've tried -test2), sccinit was unable to
    found the control ports of the card (was telling "Missing"). With
    test 11, the driver seems to initialise fine

    kernel: NET: Registered protocol family 3
    kernel: AX.25: Z8530 SCC driver version 3.0.dl1bke
    kernel: scc0: data port = 0x303 control port = 0x302 -- found
    kernel: scc1: data port = 0x301 control port = 0x300 -- found

    The the shell is dead. An other shell where I start listen dies too.
    The related process are not killable...

    I'm running DEbian sid. 

    --
Ragards and 73
			- Jean-Luc

    Le 11.12.2003 16:43, David Quental a écrit :
> Hello to all.
> 
> I have on uscc at address 320 and irq 5, it works fine under kernel  
> 2.4.21-144 from SuSE 9.0. But under kernel 2.6.0-test11 i have  
> problem when try to load it, shell freezes and if i do command  
> 'ifconfig' in another shell it freezes as well. Since first kernel  
> 2.6.0 i have problems with my uscc, never worked because of those  
> freezes.
> Any help will be fine.
> Another thing:
> in kernel 2.6.0-test11 i use same .config than in SuSE.
> 
> Best 73 till then.
> 
> CT1DRB
> David Quental
> 
> 
> 
> -
> To unsubscribe from this list: send the line "unsubscribe linux- 
> hams" in
> the body of a message to uorbk@geosyntec.com
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
    - To unsubscribe from this list: send the line "unsubscribe linux-hams" in the body of a message to ircvvdzy@fontbonne.edu More majordomo info at http://vger.kernel.org/majordomo-info.html

    This archive was generated by hypermail 2b30 : Thu Dec 11 2003 - 18:00:51 EET