From: Pontus Falk (oapr.gbsya@contourgroup.com)
Date: Sat Jul 05 2003 - 21:54:24 EEST
Hi!
It could be so that my NAT router (W-linx MB-400S/E) doesn't handle
protokoll 93 very well..?
Now I try to get AXUDP to work.
I changed 'socket ip' to 'socket udp' in ax25ipd.conf.
I also put 'route sm7xxx 213.65.xxx.xxx b' in ax25ipd.conf. Does it maybe
have to be a 44.xxx.xxx.xxx number?
If it have to be a 44 number, should I then have a line like '/sbin/route
add -net 44.xxx.xxx.xxx netmask 255.255.255.0 tunl0 gw 213.65.xxx.xxx'?
Hope to hear from you all!
Thanks in advance!
73 de Pontus/SMØRUX
Arno Verhoeven skrev:
> Pontus Falk wrote:
>
>>Hi!
>>
>>I'm trying to set up an AXIP link fo a friend of mine, with no
>> success...
>>
>>I'm using 2.4.20. Everyting is running very good, so I guess it is just
>> a matter of configuration.
>>
>>I've read AX25-HOWTO, but don't get it to work...
>>
>>Any ideas?
>>
>>Regards,
>>
>>Pontus Falk/SMØRUX
>>
>>
>
> Hi Pontus,
>
> axipd doesn't handle SSID's very well, so if your using a SSID ID other
> than -0 then this might be the cause why you don't get it to work.
>
> Otherwise, send us is the command lines you use to iniate axip, and the
> axipd.conf file.
>
> --
> 73, PE1ICQ Arno Verhoeven
> --------------------------------
> AX.25 pe1icq@pi8zaa.#nbo.nld.eu
> smtp ldnwn.lmey@grandenetworks.net
> inet bcsx.xmbjok@decunet.org
-
To unsubscribe from this list: send the line "unsubscribe linux-hams" in
the body of a message to yvjbhohq.gbesytloei@702communications.com
More majordomo info at http://vger.kernel.org/majordomo-info.html
This archive was generated by hypermail 2b30 : Sat Jul 05 2003 - 21:54:56 EEST