From: Ray Wells (eckw.ravchdnsjq@hiway.fi)
Date: Mon Jun 23 2003 - 03:17:55 EEST
Hi All,
I intermittently get the following message from mkiss ....
mkiss: ax1: truncating oversized transmit packet!
Usually when this happens I have to reboot the system to restore the port to
a working condition, but sometimes, like right now, the port keeps working
ok. Being a HF port makes it impossible to monitor what is "really"
happening on another radio.
I'm not sure of what information I should include here so I'll post what I
think might be relevant.
The machine is a Pentium 166 with 32M RAM running Debian 2.2.r0 with kernel
2.2.20 running xfbb (7.04h) and fpac (3.25).
There are nine ports: four using a Baycom USCC>4 card (but the 9k6 port is
not in service), two using TNC's with KISS-only EPROM's, one axip link on my
LAN, and two loopback between the bbs and the node. The BBS has a Telnet
port configured.
The offending port, ax1, is used on 40m with a paclen of 64, if that
information is relevant. My scc1, 30m port also has paclen 64 configured.
All other ports are configured for paclen 250.
Here is my /etc/init.d/ax25 file, with non-essential garbage removed.
#!/bin/sh
#
# This is /etc/init.d/ax25
test -f /usr/sbin/ax25d || exit 0
# Configure serial ports
#echo "Configuring serial ports"
/bin/setserial -v /dev/ttyS0 irq 4
/bin/setserial -v /dev/ttyS1 irq 3
# AX25
echo "AX25: starting interfaces ..."
#
echo "Starting sccinit"
/sbin/sccinit
#
# configure the scc0/local device
/sbin/ifconfig scc0 44.136.56.25 hw ax25 KEMPC-13
/sbin/ifconfig scc0 netmask 255.255.255.0 broadcast 44.136.56.255 arp
# configure the scc1/30m device
/sbin/ifconfig scc1 44.136.56.25 hw ax25 KEMPC-12
/sbin/ifconfig scc1 netmask 255.255.255.0 broadcast 44.136.56.255 arp
#
# configure the scc2/70cm device
/sbin/ifconfig scc2 44.136.56.25 hw ax25 KEMPC-11
/sbin/ifconfig scc2 netmask 255.255.255.0 broadcast 44.136.56.255 arp
#
#configure the scc3/9k6 device
/sbin/ifconfig scc3 44.136.56.25 hw ax25 KEMPC-10
/sbin/ifconfig scc3 netmask 255.255.255.0 broadcast 44.136.56.255 arp
#
# configure the ax0/7550 device
#
echo -n " 7550 "
/usr/sbin/kissattach /dev/ttyS0 7550 44.136.56.25
/sbin/ifconfig ax0 44.136.56.25 netmask 255.255.255.0 broadcast 44
136.56.255 arp
#
#
echo -n " 40m "
/usr/sbin/kissattach /dev/ttyS1 40m 44.136.56.25 -m 64
/sbin/ifconfig ax1 44.136.56.25 netmask 255.255.255.0 broadcast 44.136
56.255 arp
#
# configure axip
/usr/sbin/kissattach /dev/ptyqf axip 44.136.56.25
sleep 2
/sbin/ifconfig ax2 44.136.56.25 netmask 255.255.255.0 broadcast 44.136
56.255 arp
#
# configure loopback ports
/usr/sbin/kissnetd /dev/ptyq1 /dev/ptyq2 &
sleep 4
#
/usr/sbin/kissattach /dev/ttyq1 bbs 10.0.0.1
/usr/sbin/kissattach /dev/ttyq2 node 10.0.0.2
#
/sbin/ifconfig ax3 10.0.0.1 netmask 255.255.255.255 hw ax25 KEMPC-6
/sbin/ifconfig ax4 10.0.0.2 netmask 255.255.255.255 hw ax25 KEMPC-5
#
# configure the netrom devices
#
echo "... configuring 'netrom'"
/usr/sbin/nrattach -i 44.136.56.25 -m 236 netrom
#
# configure the rose device
#
echo "... configuring 'rose'"
/usr/sbin/rsattach -i 44.136.56.25 rose
#
/bin/netstat -rn
#
#
echo "Setting KISS parameters for 7550"
/usr/sbin/kissparms -p 7550 -r 125
/usr/sbin/kissparms -p 7550 -t 400
/usr/sbin/kissparms -p 7550 -s 20
/usr/sbin/kissparms -p 7550 -f n
/usr/sbin/kissparms -p 7550 -l 40
#
#
echo "Setting KISS parameters for 40m"
/usr/sbin/kissparms -p 40m -r 64
/usr/sbin/kissparms -p 40m -t 400
/usr/sbin/kissparms -p 40m -s 20
/usr/sbin/kissparms -p 40m -f n
/usr/sbin/kissparms -p 40m -l 200
echo -n "Starting AX25 and NetRom networking daemons: "
echo -n " ax25d"
/usr/sbin/ax25d &
echo -n " netromd"
/usr/sbin/netromd -t 30 -i &
echo -n " Starting axip daemon"
/usr/sbin/ax25ipd
echo -n " mheardd"
/usr/sbin/mheardd &
/usr/sbin/rxecho
echo -n " Starting Ethernet"
ifconfig eth0 44.136.56.95
#
echo "Setting AX25 parameters"
/usr/sbin/axsetparms
#
echo "Starting FPAC daemon"
/usr/local/fpac/fpac.sh
sleep 2
#
#
echo -n "Starting Xfbb daemon"
/usr/sbin/fbb &
Does anyone have some thoughts on this problem?
Regards
Ray Wells VK2TV
-
To unsubscribe from this list: send the line "unsubscribe linux-hams" in
the body of a message to quwjtabg@mindspring.com
More majordomo info at http://vger.kernel.org/majordomo-info.html
This archive was generated by hypermail 2b30 : Mon Jun 23 2003 - 03:20:28 EEST