From: Rémi Chateauneu (terhi.victor@logonet.com)
Date: Thu Feb 20 2003 - 23:41:11 EET
Hamish Moffatt <nmxbzpxj.gzhz@imatranet.fi> a écrit dans le message :
qmucys.kdzr@suedu1-233-20.utaonline.at
> > For the setup, I first do a 'rmmod' of all modules related to the sound
card.
> > Then setserial /dev/ttyS0 uart none port 0 irq 0
>
> Looks good. Only 'uart none' is needed btw.
>
> > To find the irq and dma parameters of the sound card :
> > modprobe -c | grep irq
>
> Didn't know that.
I did not know any other way that this one I found on the web. What else
could I do ?
Maybe these values are bad ?
> > modprobe hdlcdrv
> > insmod soundmodem mode="sbc:afsk1200" iobase=0x220 irq=7 dma=1
> > sethdlc -p -i sm0 mode sbc:afsk1200 io 0x200 irq 7 dma 1 serio 0x3f8
>
> Two things. Firstly no need to provide the same information twice
> (module parameters AND sethdlc); I just use sethdlc. Secondly the
> address you have to sethdlc is different - 0x200 vs 0x220. Could be your
problem.
Mistyping, sorry. Thaks for the info.
>
> > And the final :
> > ifconfig sm0 hw ax25 X1ABC up
>
> Should also assign a dummy IP address.
So, I typed :
ifconfig sm0 hw ax25 X870 192.3.1.2
===>>> SIOCSIFFLAGS: No such device
> Is your sound card SB-compatible?
How can I know that, please ?
Maybe I rmmod'ed too many modules ?
Another problem. If I type
rmmod soundmodem
I get the error :
'segmentation fault'
> You could also try the user-space (non kernel) soundmodem driver. It
> uses your existing sound card drivers although not all cards are
supported.
Great ! Where is it ? What is its name ?
Thanks a lot !!
-
To unsubscribe from this list: send the line "unsubscribe linux-hams" in
the body of a message to oxuys.yjlvg@eastbay.com
More majordomo info at http://vger.kernel.org/majordomo-info.html
This archive was generated by hypermail 2b30 : Thu Feb 20 2003 - 23:35:58 EET