Poor eth0 through put

From: John J. Bauerly (bovirdc@everys.com)
Date: Mon Oct 14 2002 - 02:04:48 EEST

  • Next message: M Taylor: "Re: Poor eth0 through put"

    Hello All;

    Another weekend and no progress. I compiled a new kernel for ax25 installed
    and it seems to be ok. However when I went to send the tgz down the lan to
    the backup machine, ftp is choking. Any file greater than 25k will not
    transfer using ftp. I pinged the machines found a high error rate between
    the 2 machines. I brought a third on line and both will work fine to it
    under RH6.2. Hum. I booted the 2 problem machines into windows. Ping and
    file transfer are ok if one or both are running windows. Don't want to run
    windows. Since then I reloaded both machines with RH6.2 orginal kernel.
    Checked and made sure which packages are running. The hardware is the same
    between the 2 that are failing and the third. To me it does not look like a
    hardware problem. It looks like a setup problem in Linux. But I have set
    software and bios the same. What else can I check and improve the lan
    performance?

    John J. Bauerly NW0I

    -
    To unsubscribe from this list: send the line "unsubscribe linux-hams" in
    the body of a message to atcd@mail.dy.fi
    More majordomo info at http://vger.kernel.org/majordomo-info.html



    This archive was generated by hypermail 2b30 : Mon Oct 14 2002 - 02:04:57 EEST