Re: Predict & KCT.

From: Erik Jakobsen (vaska@kerailya.tunkki.fi)
Date: Sun Mar 03 2002 - 16:45:26 EET

Next message: Riley Williams: "Re: Predict & KCT."

Previous message: Ruben Navarro Huedo: "test"
In reply to: Riley Williams: "Re: Predict & KCT."
Next in thread: Riley Williams: "Re: Predict & KCT."
Reply: Riley Williams: "Re: Predict & KCT."
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

On Sunday 03 March 2002 12:46, Riley Williams wrote:
> Hi Eric.

Hi Riley.

> > Can predict be used as kct can to control an azimuth rotor ?.
>
> It can send the relevant information to the serial port directly, or
> could be used as a server with a fairly simple program controlling the
> rotator as predict does almost all of the hard work.

Can it only control a serial port, and not a parallel ??.

> If you advise the requirements of the rotator in question, I'll see what
> I can come up with.

The rotor is the Yaesu G-1000SDX. Only azimuth are required.

> Best wishes from Riley.

The same from me, Erik.

> -
> To unsubscribe from this list: send the line "unsubscribe linux-hams" in
> the body of a message to lfw.jrrocz@plastekgroup.com
> More majordomo info at http://vger.kernel.org/majordomo-info.html

-- 
Med venlig hilsen / Best regards / Vy 73 de Erik OZ4KK
Erik Jakobsen - hzzk@mitex.net
Using SuSE linux 7.3
-
To unsubscribe from this list: send the line "unsubscribe linux-hams" in
the body of a message to rapq.epok@kaleidahealth.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Next message: Riley Williams: "Re: Predict & KCT."
Previous message: Ruben Navarro Huedo: "test"
In reply to: Riley Williams: "Re: Predict & KCT."
Next in thread: Riley Williams: "Re: Predict & KCT."
Reply: Riley Williams: "Re: Predict & KCT."
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

This archive was generated by hypermail 2b30 : Sun Mar 03 2002 - 16:46:44 EET