From: Riley Williams (terhi.victor@logonet.com)
Date: Sat Feb 09 2002 - 21:34:52 EET
Hi Charlie.
> I am trying to get DRSI scc cards running with a new Suse 7.3
> (2.4.10 kernel) installation.
I use RedHat myself, so can't help with any Suse-specific items. Also,
whilst I have a Baycom USCC card, that isn't the DRSI card and there
could easily be differences.
> I believe I have everything set up correctly. However, when I
> attempt to connect using the DRSI card, it stays keyed up for the
> duration of the maxkeyup parameter. I have gone through the items
> mentioned in the different documents (correct IRQ, define SCC_DELAY,
> using dpll, correct clock value, etc.). I am pretty sure that I have
> the correct parameters in my z8530drv.conf file.
> I do not see any address or IRQ conflicts with other devices.
What port addresses do you have the DRSI card(s) set to?
One thing to remember is that most sound cards grab 0x030? addresses for
their own use, so it's a good idea to avoid that area if you can. They
also like to grab IRQ5 as well.
> Does anyone have any other suggestions?
Unfortunately, no.
Best wishes from Riley.
-
To unsubscribe from this list: send the line "unsubscribe linux-hams" in
the body of a message to eirjd@mx.dy.fi
More majordomo info at http://vger.kernel.org/majordomo-info.html
This archive was generated by hypermail 2b30 : Sat Feb 09 2002 - 21:53:51 EET