Re: PCISCC driver

From: Niall Parker (yvhtro.ffgfxrpnv@sec.gov)
Date: Tue Feb 05 2002 - 07:18:11 EET

  • Next message: Jonathan NAYLOR: "Re: State Machine"

    On Mon, Feb 04, 2002 at 05:15:44AM -0800, John F. Feist wrote:
    > While chatting with Dale Heatherington WA4DSY, I had asked him to take a look
    > at the PCISCC4 interface.
    > ----
    > > I took a quick look and see all the interface signals are present.
    > > Assuming they are CMOS levels it should work.
    > ----
    > I was looking for an alternate SCC interface card for his 56k packet modem
    > (http://www.wa4dsy.net) and was wondering if the signal are CMOS level ?

    The interface on the PCISCC4 is direct to the chip, and so is most likely
    3v3 CMOS ... interfacing to the 'DSY modem directly would not be ideal.

    I have designed and laid out a RS422 interface board intended to connect the
    PCISCC4 to the 'DSY modem, but as I haven't got a PCISCC4 yet it hasn't been
    built or tested. I assume from the emails on the list that the card is
    finally shipping (so I should find the time to order a pair !)

    If anyone wants to try my design, let me know and I'll send you the
    files.

                                                    ... Niall (VE7HEX)
    -
    To unsubscribe from this list: send the line "unsubscribe linux-hams" in
    the body of a message to whynk@roskapostia.tunk.net
    More majordomo info at http://vger.kernel.org/majordomo-info.html



    This archive was generated by hypermail 2b30 : Tue Feb 05 2002 - 07:40:55 EET