From: Arno Verhoeven (ihohj@jcyl.es)
Date: Fri Jan 04 2002 - 16:34:41 EET
Bob B wrote:
> Hi to all
> I been trying to get an telnet port on fbb but cant seem to get it to
> work
> can anyone please tell me what i need to do here is what i have in
> port.sys
> i have 1 port and 1 tnc set in the top line if that makes any differents
> i add the line to services file and nothing
> it will try going to port 3286 but when it connects it hangs and if i hit
> enter i get an lng # then erorr callsign/password it doesnt matter what
> port i guess most use 6300 that is fine i use it also but i just need to
> know howto get it to accept on what i have!
> thanks
> BOB
>
>
> -
> To unsubscribe from this list: send the line "unsubscribe linux-hams" in
> the body of a message to etqw.rsspv@dsb.dk
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
Bob,
It's not really clear to me what you have done, but for a FBB config with
only one telnet port you would need to do something like this:
# /etc/ax25/fbb/port.sys
#
# FBB7.04
#
#Ports TNCs
1 1
#
#Com Interface Adress(Hex) Baud
1 9 189C 0
#
#TNC NbCh Com MultCh Pacln Maxfr NbFwd MxBloc M/P-Fwd Mode Freq
0 0 0 0 0 0 0 0 00/01 ---- File-fwd.
1 5 1 0 250 2 1 10 00/60 TUW Telnet
#
# End of file.
This will enable you to telnet to FBB on port 6300.
Depending on what are your default user persions in FBB, you might also
need to enable telnet access per user.
To do that you need to login the BBS. enable sysop mode (SYS command)
and with the EU command edit the user permissions. For telnet access you
need to set the M flag.
#73, PE1ICQ Arno Verhoeven
--------------------------------
AX.25 pe1icq@pi8zaa.#nbo.nld.eu
smtp hwgayuz@mail.dy.fi
inet terhi.victor@logonet.com
-
To unsubscribe from this list: send the line "unsubscribe linux-hams" in
the body of a message to kdyy.sqbdxbtyrt@softava.com
More majordomo info at http://vger.kernel.org/majordomo-info.html
This archive was generated by hypermail 2b30 : Fri Jan 04 2002 - 16:37:36 EET