From: Ray Wells (pgqtx@relcominc.com)
Date: Mon Dec 03 2001 - 04:40:31 EET
Hi All,
I've been running ax25ipd for some time as a udp link to my Windows machine
and it's worked ok.
I'm currently setting up a second Linux box so that I can split my hf bbs
ports away from the main system to overcome a paclen problem with fbb.
This will give me three machines on the LAN which uses a 3 Com hub - one
Windows and two Linux.
The Linux machines run Debian Potato 2.2 r0 - kernel 2.2.19 in the main
machine and 2.2.17 in the new machine.
The version of ax25ipd is 1.0.2 / 0.0.4.
My problem is that I can have the main Linux machine talk to either the
Windows machine, or the second Linux machine, but not both.
What is happening is that only the default route in ax25ipd.conf is being
invoked.
I'm stuck with udp to talk to the Windows box but have tried both udp and ip
to talk to the new Linux system, with the same problem resulting.
What follows is my ax25id.conf file for the main system. The only route that
works is the one using the "d" option. As shown, I can talk to the Windows
machine but if I move the "d" to the second route I can use it.
I hope I've provided enough info to get the ball rolling on this one.
#ax25ipd.conf
#
socket ip
#
socket udp 93
#
mode tnc
#
beacon every 30
#
btext ax25ip -- tncmode Ray/vk2tv -- Experimental AXIP gateway
#
device /dev/ttyqf
#
speed 19200
#
loglevel 0
#
broadcast QST-0 NODES-0
#
# route <destcall> <destaddr> [flags]
#
# Valid flags are:
# b - allow broadcasts to be transmitted via this route
# d - this route is the default route
#
route vk2tv-3 gizmo udp 93 d
route vk2tv-6 hfvk2tv b
Ray Wells VK2TV
-
To unsubscribe from this list: send the line "unsubscribe linux-hams" in
the body of a message to dgl@allycards.com
More majordomo info at http://vger.kernel.org/majordomo-info.html
This archive was generated by hypermail 2b30 : Mon Dec 03 2001 - 10:52:03 EET