Re: soundmodem (2.2.19)

From: Brent Corbin (nlr.gqkpgvqi@finecogroup.it)
Date: Tue Jun 05 2001 - 19:31:00 EEST

  • Next message: LETANG Eric USCE: "RE: Serial Port problems with kernel 2.4.2"

    On Tue, Jun 05, 2001 at 07:12:43PM +1000, Hamish Moffatt wrote:
    >
    > Hmm. What if you use sethdlc to send a calibration tone? Anything then?
    > You must get the serial driver to release the port. Use
    > "setserial /dev/ttyS<N> uart none" to do that. The kernel-based soundmodem
    > has its own serial driver, just like it has its own sound card driver.
     

    Ahhh - that *must* be it... I'm no newbie, and I've figured out a lot of
    similar things over the years - but truthfully, I don't think I would have
    caught this on my own... **** THANKS Hamish ****

    > > Well, that's not entirely true. I can actually key/unkey the transmitter
    > > if I use 'soundmodemconfig' from Thomas' soundmodem-0.4. I know
    > > what you're about to say - unfortunately, when I run soundmodem-0.4,
    > > I get "sm[226]: cannot start audio" - despite the fact that my soundcard
    > > (a Mozart MAD16) works fine for everything else (including the kernel-based
    > > soundmodem, and soundmodemconfig)
    >
    > Do you have the kernel sound drivers installed? If I recall correctly,
    > the user-space soundmodem uses the regular sound drivers. The kernel-based
    > one had its own sound drivers.
     
    Exactly right. I actually do have everything installed - in fact,
    soundmodem-0.2 and -0.3 appeared to work fine... (heck,
    soundmodemconfig from -0.4 works fine)... I'm stuck on 2.2.19
    anyway, until I can figure out why my ide-cdrom on ide1 loses
    its interrupts in 2.4.5... when I get that ironed out, then
    I'll have to look into what's happening with the user-space soundmodem 8*)
    (I'd really like to get that working)

    > > Using /lib/modules/2.2.19/misc/soundcore.o
    > > Using /lib/modules/2.2.19/misc/sound.o
    > > [...]
    >
    > You don't want these around if you're using the kernel-space soundmodem.

    Right. I load and unload everything quickly, to initialize the
    mad16. The rmmod confirmation, for whatever reason, didn't
    make it into the quick stdout dump...

    Thanks again Hammish... If you ever find your way to Los Angeles,
    let me buy you a beer or two 8*) 73... //Brent

    -
    To unsubscribe from this list: send the line "unsubscribe linux-hams" in
    the body of a message to vzlryf@warwick.ac.uk



    This archive was generated by hypermail 2b30 : Tue Jun 05 2001 - 19:39:25 EEST