Re: Soundblaster/PSK31/modules???

From: Hamish Moffatt (gmkvi@mail.dy.fi)
Date: Tue Apr 03 2001 - 01:34:26 EEST

  • Next message: Jan Sas: "RE: ax25 Oops"

    On Mon, Apr 02, 2001 at 05:36:18PM +0000, Hal MacArgle wrote:
    > psk31lx-0.5.tgz extracts and compiles OK and I can modprobe sound.o
    > and insmod uart401.o OK but insmod sb.o returns "busy", see report
    > below.
    >
    > The 0x0220 i/o port and 05 interrupt are not used by any other
    > device, again see report below.

    [..]

    > root@lnx1:~# insmod sb
    > Using /lib/modules/2.2.16/misc/sb.o
    > /lib/modules/2.2.16/misc/sb.o: init_module: Device or resource busy
    > Hint: this error can be caused by incorrect module parameters, including
    > invalid IO or IRQ parameters

    I can't see where you are specifying the IO and IRQ settings here?

    There are four options in all: IO address, IRQ, 8-bit DMA channel
    and 16-bit DMA channel.

    If your card is plug and play, you need to use isapnptools to
    configure it first. I think the 2.2 kernel can do it for you, also.

    Hamish 

    -- 
Hamish Moffatt VK3SB <mfmsw.gdgbmaxi@bdnacorp.com> <zwscg.kbkuf@rele.tunk.net>
-
To unsubscribe from this list: send the line "unsubscribe linux-hams" in
the body of a message to qnxh@utoledo.edu

    This archive was generated by hypermail 2b30 : Tue Apr 03 2001 - 01:36:14 EEST