From: Marco Calistri (terhi.victor@logonet.com)
Date: Mon Feb 12 2001 - 23:38:42 EET
Hello HAMS,
I'm very sorry to disturb with 'obvious' questions,but to me
understanding AX25 kernel stuff and configurations is really difficult.
I'am playing around AWZNode,JNOS,kernel 2.2.16 and RH6.2.
The attempt is to make AWZNode working with JNOS at same time on /dev/ttyS2 port
through a 9k6 TNC.
Thanks to Ronnie <w0plw> who very gently sent me his JNOS/AWZNode
full config.file,I obtained a 'half/way' working system,
where I 'see' AWZNode from JNOS and both can access /dev/ttyS2,
however I see that a lot is still to adjust.
The major 'problems' I see here are:
an error message :mkiss: ax0:transmit timed out,driver error?
which appears whenever I reboot my linux-box,preceeding JNOS start.
an error message :modprobe:Can't locate module netrom
[but I have compiled in as static module!].
Flexd is not able to end updating of his DESTINATIONS table.
Moreover I'am very confused about /etc/ax25/xxxfiles configuration
expecially on:
ax25d.conf *about callsign and SSIDs*
ax25ipd.conf *about mode:digi or tnc?*device?*routes?*
ax25rtd.conf *everything*
axports *about callsign and SSIDs*
All the ax25 stuff is launched from /etc/rc.d/rc.local.
I invite some volounteer to offer his help privately to avoid ML choke.
I also invite people to not respond with :"look my homepage..."
because there are too many variables so that I could misunderstand a lot of
instructions.
-- Regards,: Marco Calistri <yodpjvgj@odn.ad.jp> pgp key available on http://www.qsl.net/ik5bcu Xfmail 1.4.7 on linux RedHat 6.2- To unsubscribe from this list: send the line "unsubscribe linux-hams" in the body of a message to mea.uscgj@relay.tunkki.fi
This archive was generated by hypermail 2b30 : Mon Feb 12 2001 - 23:36:53 EET