From: Thomas Sailer (skjs@nesusa.com)
Date: Mon Jan 08 2001 - 17:04:58 EET
John Ackermann wrote:
>
> This has to be a dumb user configuration error, but I'm trying to get a
> picpar96 modem running with no luck. Any attempt to set up the modem
> via "ifconfig bcp0" returns an error that "parport at 0x378 has no
> irq". If I try to specify an irq on either an insmod command, or using
> sethdlc, it tells me that irq is an invalid parameter type -- which
> leads me to believe that it autoprobes the IRQ.
You do not need to specify the interrupt to the baycom_par module,
but to the parport_pc module! The exact way how to do this depends
on the kernel version, though. On some kernels, adding "irq=7" to
parport_pc helps, others may want "echo 7 > /proc/parport/parport0/irq"
or
similar.
Tom
-
To unsubscribe from this list: send the line "unsubscribe linux-hams" in
the body of a message to acrnqhx.nmjt@inyc.com
This archive was generated by hypermail 2b30 : Mon Jan 08 2001 - 17:06:06 EET