Re: USCC card config

• Previous message: Tomi Manninen OH2BNS: "Re: AXIP Disconnections"
• In reply to: richard.bown: "USCC card config"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Richard,

On Tue, Jan 02, 2001 at 04:33:12PM +0000, richard . bown wrote:

> Hi All , could some kind person send me their z8530.conf file , if their using
> a baycom uscc card with DF9IC 9k6 modems fitted...

you can find one in the example /etc/ax25/z8530drv.conf:

device scc3
speed 9600
clock ext
mode nrz
#
txdelay 8
persist 64
slot 8
tail 8
fulldup 0
wait 2
min 3
maxkey 7
idle 3
maxdef 120
group 0
txoff off
softdcd off

BTW, if you are using the BayCom USCC<8 you must

- swap the addresses of data_a with data_b and ctrl_a with ctrl_b
  (i.e. data_a=0x301, data_b=0x300, etc...)
- remember that port 0 == scc1, port 1 == scc0, port 2 == scc3, port 3 == scc2
  etc

I know it's confusing... :-(

73,

-- 
Joerg Reuter DL1BKE                             http://yaina.de/jreuter
And I make my way to where the warm scent of soil fills the evening air. 
Everything is waiting quietly out there....                 (Anne Clark)

• application/pgp-signature attachment: stored

• Next message: Chris Leishman: "ax.25 and broadcast/multicast"
• Previous message: Tomi Manninen OH2BNS: "Re: AXIP Disconnections"
• In reply to: richard.bown: "USCC card config"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

This archive was generated by hypermail 2b30 : Wed Jan 03 2001 - 17:06:20 EET