Re: Yam.

From: Jorge Matias (ykeahljn.oophokfdfa@kzs.hu)
Date: Thu Dec 07 2000 - 21:52:17 EET

  • Next message: Zilvinas Atkociunas: "protocol 0000 is buggy, dev bcsf0 ???"

    On Thu, 7 Dec 2000, Erik Jakobsen wrote:

    > Jorge Matias wrote:
    > >
    > > On Thu, 7 Dec 2000, Erik Jakobsen wrote:
    > >
    > > > Hi.
    > > >
    > > > How do I change the bitrate from 9600 bps to 1200 bps in yamcfg ??.
    > >
    > > yamcfg ... bitrate 1200 ... load 1200 <MCS file>
    >
    > Now I have downloaded the files, but it doesn't work. Please write me
    > how I shall exactly write the sequence for bitrate 1200.
    >
    > I did it so:
    >
    > yamcfg bitrate 1200 load /home/erik/yam/yam12v11.mcs

    insmod yam # Load yam.o module
    setserial /dev/ttyS<number> uart none # If you have loaded serial module
    yamcfg yam0 iobase <address> irq <irq> bitrate 1200 load 1200 /home/erik/yam/yam12v11.mcs

    # <number> replace with 0 for COM1, or 1 for COM2, etc...
    # port <address> replace with 0x3f8 for COM1
    # 0x2f8 for COM2
    # <irq> replace with 4 for COM1
    # 3 for COM2

    # then ...
    ifconfig yam0 <ip address> hw ax25 <callsign> netmask <netmask> up

    # <netmask> is tipically 255.255.0.0 to represent only the class of IP
    # addresses in each radio operators country
    # Anyway, not important to put YAM to work at 1200.
    #

    # NOTE: If YAM still doesn't work, and if you have a modern computer
    # it happens that the computer doesn't have enough power supply to
    # maintain it working.
    # In this case try removing the 3 LEDs. Even if they are of low power
    # comsumption, they make the difference to compromise YAM behaviour.
    # Instead of this you can try to apply external symmetrical power supply
    # which I don't like. :(

    >
    >
    > > The MCS file to upload to YAM is available at Nico Palermo Page.
    > >
    > > Regards,
    > > Jorge Matias
    > > CT2HBZ
    > >
    > > > --
    > > > 73 de Erik, OZ4KK
    > > > terhi.victor@logonet.com
    > > > -
    > > > To unsubscribe from this list: send the line "unsubscribe linux-hams" in
    > > > the body of a message to xalnwvlw.pjumy@swipnet.se
    > > >
    >
    > --
    > 73 de Erik, OZ4KK
    > rjxlul@uclan.ac.uk
    >
    > mvh, Erik.
    > terhi.victor@logonet.com
    >
    > Med venlig hilsen Erik Jakobsen
    > wvrb.zymcmd@dunakanyar.net
    >
    > Regards de Erik
    > benu.aumlppgfk@b2net.ca
    >

    -
    To unsubscribe from this list: send the line "unsubscribe linux-hams" in
    the body of a message to ushpjj.obnjawlzr@mx.dy.fi

    This archive was generated by hypermail 2b30 : Thu Dec 07 2000 - 21:53:15 EET