Voice over Ip Repeater link

From: Hast, Chuck (famyc.uyea@ecb.int)
Date: Thu Nov 02 2000 - 21:18:43 EET

  • Next message: Jorge Matias: "RSPF: Patch to CVS version 1.1"

    Folks:
    I would like to use LINUX to build a voice link between repeaters.
    Initially I want to use some wireless LAN gear for the RF link.

    I have in hand sound cards, several mother boards, and all the
    needed hardware to build up a small LINUX box for each end,

    Is there software available for LINUX that would allow me to build
    the devices that go between the voice repeater on each end that
    will handle the conversion and routing of the voice data out on the
    wireless LAN gear.

    I have some 4 wire audio paths off of the repeater controller and
    remote base link control lines on the same, the idea is to allow
    those to signal to the LINUX box when to bring up the path and
    start shipping VoIP packets out to the network. If others of you
    have done this I would be quite interested in how you have done
    it.

    The next step will then be to build some sort of conference server
    to handle multiple connections.

    Chuck Hast
    Telecomms Consultant, Utility Partners.
    WEB www.utilpart.com
    Office number: 813.282.8828 x 1175
    C-phone number: 813.765.6743
    E-mail: hcfyr@lrvk.lt
    SMS < 150 characters: rytajw@cbot.com
           

    *****************************************************************
    This e-mail and any files transmitted with it are confidential and are
    intended solely for the use of the individual or entity to whom it is
    addressed. If you have received this transmission in error, please notify
    the sender immediately and destroy any hard copies you may have printed and
    remove all copies of the e-mail from your hard drive. Opinions, conclusions
    and other information in this message that do not relate to the official
    business of Utility Partners, Inc shall be understood as neither given nor
    endorsed by it.

    Visit us on the web at www.utilpart.com
    *****************************************************************

    -
    To unsubscribe from this list: send the line "unsubscribe linux-hams" in
    the body of a message to sag@macdsl.com



    This archive was generated by hypermail 2b30 : Thu Nov 02 2000 - 21:20:14 EET