Re: netromd & ax25d

From: Erik Jakobsen (oxizan@rele.tunk.net)
Date: Mon Oct 02 2000 - 08:45:10 EEST

  • Next message: Erik Jakobsen: "ifconfig."

    "Jose R. Marte A." wrote:
    >
    > ----------
    > > From: Erik Jakobsen <aeddok@niagara.net>
    > > To: godagmvz.abwg@tiscali.fr; ulocpgbf.bktztfhcf@eslawfirm.com
    > > Subject: Re: netromd & ax25d
    > > Date: Sunday, October 01, 2000 2:41 PM
    > >
    > > Tomi Manninen wrote:
    > > >
    > > > On Sun, 1 Oct 2000, Erik Jakobsen wrote:
    > > >
    > > > > > > linux:~ # ax25d
    > > > > > > axconfig: port vhf not active
    > > > > > > axconfig: port uhf not active
    > > > > > > ax25d: no AX.25 port data configured
    > > > > > >
    > > > > > > What the reason for this ?.
    > > > > >
    > > > > > Are you sure those ports really are active? Do you see them as "UP"
    > and
    > > > > > "RUNNING" with ifconfig? Also have you assigned an IP address to
    > them? You
    > > > > > need to do that also if you don't intend to run TCP/IP. Use fake
    > addresses
    > > > > > from the 192.168.0.0 private network if you don't have an official
    > amprnet
    > > > > > address or don't want to use it.
    > > > >
    > > > > No they are NOT:
    > > >
    > > > Not what? Active? Then make them active, you can not expect anything to
    > > > work if your AX.25 ports are not active.
    > >
    > > Are you sure those ports really are active? Here I answered 'no they are
    > > NOT'.
    > > I'm awre of that fact Tomi that it can't work if they are not active.
    > > Just as
    > > a lamp, cannot light if not switched on.
    > >
    > > BUT my friend was what I try to ask for how to do, but maybe you cannot
    > > answer,
    > > and its ok. Just say it, and do not be rigid.
    > >
    > > I know you have the experience, and I have not so much as you have. It
    > > maybe is
    > > a linux-newbie question, but then I also will get rigid answers.
    > >
    > > I do not know where to ask then.
    > >
    > > Forgive me that I'm not as clever as you.
    > >
    > > But maybe its not that you are answering me so arrogant.
    > >
    > > The please explain my why.
    > >
    > > To be able to go you need to crawl first.
    > >
    >
    > Not, not Erik,
    >
    > You are confusing about the answer from Tomi
    > read again the text and then you can to respond about it
    > what are you thinking ?,

    Well something is wrong HI. Maybe I haven't read it exactly. I could see
    what Hans Peter wrote me. He direct answered my question.

    But thank you for your letter Jose.

    > Tomi says check with the ifconfig and watch if those interfaces are
    > UP RUNNING

    Thats correct, and I did it, but the interfaces was NOT UP RUNNING.

    Then I asked on how to do.
     
    > 73's Jose (hi8gn)
    >
    > -
    > To unsubscribe from this list: send the line "unsubscribe linux-hams" in
    > the body of a message to bls@mx.dy.fi

    73 de Erik OZ4KK. 

    -- 
De bedste hilsener // Best regards // Erik Jakobsen
terhi.victor@logonet.com // SuSE linux 6.3
Licensed RadioAmateur with the callsign OZ4KK.
-
To unsubscribe from this list: send the line "unsubscribe linux-hams" in
the body of a message to wazor.hxgcfsft@inttek.net

    This archive was generated by hypermail 2b29 : Mon Oct 02 2000 - 09:40:58 EEST