Re: netromd & ax25d

From: Hans-Peter Zorn (vqrpxtys.jeozly@kerailya.tunkki.fi)
Date: Mon Oct 02 2000 - 00:26:16 EEST

  • Next message: Jose R. Marte A.: "Re: netromd & ax25d"

    To activate a network device with kernel 2.2/2.4 you have
    to assign an IP address to the interface. This is done using
    the "ifconfig" command, e.g.:
    /sbin/ifconfig ax0 44.130.52.88 hw ax25 dg4iad up

    Replace "ax0", "44.130.52.88", and "dg4iad" by your network
    device, your ip adress and your callsign. Do the same
    for the "nr0" interface (netrom). Or use ax25-config which
    does all these things for you <shameless plug>.

    This isn't necessary with 2.0 kernels or the NEW-AX.25
    protocol stack.

    HTH hp 

    -- 
Hans-Peter Zorn, Karlsruhe, Germany
http://www.stud.uni-karlsruhe.de/~uhsm/      ejvq@interoute.com    (preferred)
http://1409.org/people/hp/                   uzx@geragera.co.jp    (hamradio stuff)
-
To unsubscribe from this list: send the line "unsubscribe linux-hams" in
the body of a message to vffxw@mailit.tunk.net

    This archive was generated by hypermail 2b29 : Mon Oct 02 2000 - 00:27:23 EEST