Re: RSPFd: Problems using it!

From: Jean-Paul ROUBELAT (iuw.nbdodxqevd@cvzoom.net)
Date: Tue Sep 19 2000 - 05:44:56 EEST

  • Next message: terhi.victor@logonet.com: "Re: ipip-tunnel specifications : where ?"

    Hi Jorge,
    ----- Original Message -----
    From: Jorge Matias <terhi.victor@logonet.com>
    To: Linux-Ham Mailing List <azl@allnet.ne.jp>
    Sent: Sunday, September 17, 2000 11:43 PM
    Subject: RSPFd: Problems using it!

    > Hi everyone!
    >
    > I have already posted messages to this mailing list about this subject,
    > but so far I had no replies.
    > Well, after several months of tests, with RSPF Daemon, I still can't put
    > just two nodes exchanging RRH and Router Bulletins. When a node sends an
    > RRH ping, the other one receives the packet, but RSPF says that the packet
    > checksum is wrong. It arrives with checksum 0x2040 (always), but the
    > receiving stations says that it should a different one. The receiver's
    > calculated checksum is different every time it receives the ping from the
    > sending stations.
    > Both stations are using RSPFd v1.0. Using 0.9 is the same thing.
    > The receiver station doesn't update its routing table with the IP
    > addresses received from the adjacent router.
    > I hope there is anyone with some knowledge about this subject to help
    > me. I have contacted Craig Small by e-mail, but so far I had no luck.
    > Thanks in advance for the help.

    I got the same problem last year when I tried to make rspfd working. It
    seems that the code is not working correctly.

    Attached a mail I sent to Craig last January concerning the chcksum problem.

    There is another problem concerning the metric if I well remember.

    I never was able to make it working correctly and I gave up.

    73,
    -----------------------------------------------------------------------
    Jean-Paul ROUBELAT - F6FBB | Computers are like air-conditioners :
    Packet: terhi.victor@logonet.com | they stop working properly as soon as
    Email : jilbhwc@electricfiber.net | you open windows.
    WEB : http://www.f6fbb.org |
    -----------------------------------------------------------------------


    attached mail follows:



    -
    To unsubscribe from this list: send the line "unsubscribe linux-hams" in
    the body of a message to ofhsh@finley-cook.com



    This archive was generated by hypermail 2b29 : Tue Sep 19 2000 - 05:45:52 EEST