Re: ifconfig sm0 up :-(

From: Rich Hall (lxpi@le-group.co.uk)
Date: Mon Aug 07 2000 - 16:26:51 EEST

  • Next message: Raymond Miller: "Re: ifconfig sm0 up :-("

    This is the same problem that I have with my installation. And my settings
    for the card are correct. It is a SB PCI 128 and it works when configured
    with the sound drivers installed which is where I got the settings from to
    start with.

    -Rich

    At 11:21 AM 8/7/2000 +0400, you wrote:
    >I compiled the Kernel with care of ax25 inside.
    >After #setcristall, #sethdlc, #ifconfig and #smmixer commands
    >I print: ifconfig sm0
    >Reseive:
    >sm0 Link encap:AMPR AX.25 HWaddr OH2BNS-1
    > inet addr:192.168.1.3 Mask:255.255.255.0
    > RUNNING MTU:256 Metric:1
    > RX packets:0 errors:0 dropped:0 overruns:0 frame:0
    > TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
    > collisions:0 txqueuelen:0
    > Interrupt:7 Base address:0x534 DMA chan:1
    >(Simpl ifconfig show me only eth0 and loopback. But sm0 is absent.)
    >
    >Then I print: smdiag -i sm0
    >smdiag: Version 0.2; (C) 1996-1997 by Thomas Sailer HB9JNX/AE4WA
    >interface sm0 down
    >
    >If I print: /sbin/ifconfig sm0 up
    > Result:
    > SIOCSIFFLAGS: No such device
    >Where there can be a mistake?

    ------------------------------------------------------------------------
      Rich Hall - http://www.netlynx.com/rich
      emailto:rrgajx.oeyi@mail.dy.fi
      amateur radio: KF6ARX
    ------------------------------------------------------------------------

    This archive was generated by hypermail 2b29 : Mon Aug 07 2000 - 16:30:32 EEST