Re: EPP adapter woes

From: Tomi Manninen OH2BNS (terhi.victor@logonet.com)
Date: Wed Aug 02 2000 - 12:21:50 EEST

  • Next message: Arno Verhoeven: "Connection 2 voice repeaters via packet radio link?"

    On Wed, 2 Aug 2000, Jens David wrote:

    > > Once the
    > > interface is up, packets never come out the h/w even
    > > though listen -a shows them going.
    >
    > This is not so good. Check that in BIOS setup EPP version 1.9
    > is selected and/or check for a BIOS upgrade. In addition to that
    > (this might sound a little but funny) change the cabling. The
    > drivers have different timings (this is quiet critical).

    I have no experience with DOS but under Linux I too have noticed that the
    cabling is really critical. For example even a rather short length of flat
    cable can totally ruin the communication. This seems to make it a bit
    difficult with the older AT motherboards where the D-connector is not
    directly on the board...

    BTW I'm talking about the EPPFLEX hardware. Don't know if this is
    applicable to the older EPP adapter.

    -- 
    Tomi Manninen           Internet:  femovfgg@wh-netz.de
    OH2BNS                  AX.25:     jslqrh@eds.ch
    KP20ME04                Amprnet:   iydttfup@ernexinc.com
    



    This archive was generated by hypermail 2b29 : Wed Aug 02 2000 - 12:24:16 EEST