Re: ISA card irq problem

From: Bob Nielsen (mzxqoa@mail.dy.fi)
Date: Wed Aug 02 2000 - 00:13:54 EEST

  • Next message: Toussaint OTTAVI (TK1BI): "Re: ISA card irq problem"

    Hi Marco,

    Try using 'setserial /dev/ttyS2 irq 7'

    The default irq for both ttyS0 and ttyS2 is 4, so if you are using
    something different, you need to specify it. See 'man setserial'.

    73, Bob

    On Tue, Aug 01, 2000 at 10:06:53PM +0200, Marco Calistri wrote:
    > Hello everybody,hope my question will be pertinent
    > with this list...
    >
    > I have a i486 with a ISA third-party high speed,
    > com card (com 3) which under windows figures irq 7,
    > but under linux (independently from kernel 2.0.38 or 2.2.14-5.0)
    > it is recognized as ttyS2 with irq 4.
    >
    > Attached to this com card I have a 9600 bps tnc that
    > performs very strange behaviours....
    >
    > Is there any way to set properly this card to linux ?
    >
    > --------------
    > 73's! da/from:
    >
    > Marco Calistri QTH Montecatini Terme (Pistoia) LOC:JN53JV
    > ik5bcu.ampr.org [44.134.210.32] Tcp/Ip JNOS v.1.11e
    > AMPRNET: terhi.victor@logonet.com
    > WWW: evtnzy@mailit.tunk.net WWW pages http://www.qsl.net/ik5bcu/
    >
    >
    >
    > 

    -- 
Bob Nielsen, N7XY                          sqna@greyhound.com
Bainbridge Island, WA                      http://www.oz.net/~nielsen

    This archive was generated by hypermail 2b29 : Wed Aug 02 2000 - 00:19:31 EEST