From: Jose R. Marte A. (terhi.victor@logonet.com)
Date: Sun Jul 09 2000 - 23:24:00 EEST
----------
> From: Tony Schonfeld <terhi.victor@logonet.com>
> To: Richard Adams <foppnwt@rwedea.de>
> Cc: jrt.njdksl@c23-30.icpnet.pl
> Subject: Re: PLIP and kernel 2.2.10
> Date: Sunday, July 09, 2000 5:24 PM
>
> On Sun, 9 Jul 2000, Richard Adams wrote:
>
> > On Sun, 09 Jul 2000, Tony Schonfeld wrote about, Re: PLIP and kernel
2.2.10:
> >
> > > lp is automaticly load with parport when a call the modprobe plip
> > > and the conflict between lp and plip say this error message :-)
> >
> >
> > Thren change your /etc/conf.modules to something like
> >
> > alias parport_lowlevel parport_pc
> > options parport_pc io=0x378,0x278 irq=7,auto
>
> already in conf.modules
>
>
> >
> > Then modprobe plip
>
> same error
>
Ok Tony this is my last shot
test this and put in the above like Richard has suggested you
the first thing that you need is check in, if the lp module is installed
if yes unmount it like this rmmod lp
on the right order you need to put this
alias char-major-6 plip
alias parport_lowlevel parprt_pc
options parport_pc io=0x378,0x278 irq=7,auto
and for last make this command
modprobe plip
with this any warning you can see, if everything was done like above
Here is a report from one test i made before
with kernel 2.2.13 rh6.1
/~#:lsmod
Module Size Used by
parport_probe 3012 0 (autoclean)
parport_pc 5660 1 (autoclean)
plip 9320 0 (unused)
parport 7712 1 [parport_probe parport_pc plip]
73's Jose (hi8gn)
bypxey.rugjt@stack.net
This archive was generated by hypermail 2b29 : Mon Jul 10 2000 - 00:25:04 EEST