Re: PLIP and kernel 2.2.10

From: Richard Adams (terhi.victor@logonet.com)
Date: Sun Jul 09 2000 - 22:18:11 EEST

  • Next message: Tony Schonfeld: "Re: PLIP and kernel 2.2.10"

    On Sun, 09 Jul 2000, Tony Schonfeld wrote about, Re: PLIP and kernel 2.2.10:
    > On Sun, 9 Jul 2000, Richard Adams wrote:
    >
    > > On Sun, 09 Jul 2000, Tony Schonfeld wrote about, Re: PLIP and kernel 2.2.10:
    > >
    > > > can't locate module parport_lowlevel
    > >
    > > This is possably one if not the whole problem, i presume you have a custom
    > > compiled kernel. ????
    > >
    > > Check /usr/src/linux/.config for PARPORT and PLIP.
    >
    > Parport module is load
    >
    > >
    > > >
    > > > my conf.modules is
    > > >
    > > > alias char-major-4 serial
    > > > alias char-major-5 serial
    > > > alias char-major-6 lp
    > > >
    > > > options plip io=0x378 irq=7
    > >
    > > I think maybe the following "might help"
    > >
    > > alias parport_lowlevel parport_pc
    > > options parport_pc io=0x378,0x278 irq=7,auto
    > >
    >
    > Yes i use these lines

    Are you sure, your conf.modules says otherwise.!!!!

    > irq 7 is free here.

    Then something is really wrong, it should say otherwise if all modules are
    loaded for parport and plip.

    >
    > I think it's may be a problem in kernel 2.2.12
    > i hope to upgrade my kernel

    I doubt it, if i remember correctly i use PLIP in that kernel but i can
    remember for sure.
    >
    > >
    > thanks for comments and help.
    > Tony 

    -- 
Regards Richard
aljrkee.iehpoyfubc@roskapostia.tunk.net
http://people.zeelandnet.nl/pa3gcu/

    This archive was generated by hypermail 2b29 : Sun Jul 09 2000 - 22:24:53 EEST