Re: SCC Card + Baycom 1k2 Modem ???

From: ron jochems (itifi@rikshospitalet.no)
Date: Sun Jul 02 2000 - 10:24:15 EEST

  • Next message: Richard Adams: "Re: SCC Card + Baycom 1k2 Modem ???"

    Cyril,

    off course you can connect it, just make sure the rx/tx/ptt leads are connected to the correct pins on the scc kart... They differ from com-port pins.
    also a problem which i found was that the opto-couplers which are on my (original) scc card messed up my ptt... I guess that you don't have opto-couplers on your self-build card and you don't have this problem.

    After all all is working fine and lot's better than on com-ports ..

    Grtz,

    PD1ACf
    ron

        -----Original Message-----
        From: Cyril Moriarty <gtpiht.bhck@thornburgmortgage.com>
        To: Linux Hams Mailing List <zugus@filnet.es>
        Date: Sunday, July 02, 2000 2:47 AM
        Subject: SCC Card + Baycom 1k2 Modem ???
        
        
        Hi,
            I have just built an SCC card and want to check if it is working. The only packet modem that I have available is a Baycom 1200 baud. Can I connect the Baycom modem directly to the SCC card?
        
        Thanks in advance,
        Cyril EI4AGB

    This archive was generated by hypermail 2b29 : Sun Jul 02 2000 - 10:33:28 EEST