RE: doesn't work well device sm0

From: Barrett, Peter G (zambnro@ndh.net)
Date: Mon Apr 03 2000 - 02:05:26 EEST

  • Next message: Matti Aarnio: "Re: Wireless Application Protocol"

    > -----Original Message-----
    > From: Youichi Sato [SMTP:terhi.victor@logonet.com]
    > Sent: Sunday, 2 April 2000 10:11 pm
    > To: izdaxioj@videotron.net
    > Subject: doesnt work well device sm0
    >
    > Hello,
    >
    > I installed ax25-utils-2.1.42a-3 under kernel-2.2.14-1vl3,
    > and recompiled with ax25 relations.
    >
    > insmod sound
    > rmmod sound
    > insmod ax25
    > insmod hdlcdrv
    > insmod soundmodem
    > sethdlc -p -i sm0 mode sbc:afsk1200 io 0x220 irq 5 dma 1
    > ifconfig sm0 192.168.1.1 hw ax25 CALLSIGN up
    > route add 192.168.1.1 dev sm0
    > route add -net 192.168.1.0 gw 192.168.1.254 netmask 255.255.255.0 dev sm0
            At this point I have "/usr/local/bin/smdiag -i sm0;
    /usr/local/bin/smmixer -i sm0 s=mic i=0
            also "/usr/local/sbin/sethdlc -i sm0" (note: no other parameters) at
    the end will enable you to immediately see packets as they are received.
    > and I try to ping 192.168.1.100 , but can listen anything from speaker.
            Best to turn the speaker off, packet noise can frighten the elderly
    and small children.
    > Why? Please,tell me.
    >
    >
    >
    > Thanks,
    >
    > Yoichi Sato
    > zwbah@mailit.tunk.net
    >
    >

    This archive was generated by hypermail 2b29 : Mon Apr 03 2000 - 02:17:47 EEST