From: Jose R. Marte A. (ifnjevip.bjwyw@wcoilexpress.com)
Date: Sat Mar 11 2000 - 22:11:11 EET
Hey Om don't use my IP 44.175.18.2 there
I'm use it here it is my IP range for Dominican Republic
it isn't for Argentina, try a private IP on the Range of
192.168.0.x or 10.0.0.x
Please don't use my IP it is active on internet OK....
and other hand you not need the ax25-utils-2.1.42a
just the libax25-0.0.7 ax25-tools-0.0.5 and ax25-apps-0.0.4
the net-tools RH6.0 has it installed
and then this, i think that you need to do something before
like configure you axports and everything involve the ax25 stuff
73's Jose (hi8gn)
xzcnubes.vcfp@unco.edu [44.175.18.1]
http://lnx.hi8gn.ampr.org/ [44.175.18.3]
and the other ip is my notebook with a hanheld
nos.hi8gn.ampr.org [44.175.18.2]
----------
> From: Ernesto Giaquinta <gzprmaqr.ntivziik@thruto.com>
> To: xauq.fihl@bayer.de
> Subject: redhat 6.0
> Date: Saturday, March 11, 2000 1:47 PM
>
> Hello to all:
>
> I have instaled RH6.0 with nettools 1.52, libax25-0.0.5, ax25-tool-0.0.5
and
> ax25-0.0.4 and ax25-utils-2.1.42a.......
> My modem is baycom half
> My scripts /etc/ax25/rc.ax25
> #!/bin/sh
> insmod ax25
> setserial /dev/ttyS1 uart none port 0x2f8 irq 3
> insmod hdlcdrv
> insmod baycom_ser_hdx iobase="ser12*" iobase=0x2f8 irq=3
> sethdlc -i bcsh0 -p mode "ser12*" io 0x2f8 irq 3
> sethdlc -i bcsh0 -a txd 200 slot 100 ppersist 40 half >/dev/null 2>&1
> ifconfig bcsh0 44.175.18.2 hw ax25 LU6MHO netmask 255.255.255.0
> My /etc/ax25/axports
> #
> #
> bcsh0 LU6MHO 1200 250 1 145.070
> #
>
> But no run
> run listen bcsh0 messages is
> axconfig 1 not active
> axconfig 2 not active
> listen> no ax.25 port data configured
> both moniton port run
> and call bcsh0 lu1ma the messages is idem
> both no call station
>
> thank for reading my message and sorry my poor english......
>
>
>
>
>
>
>
>
>
>
This archive was generated by hypermail 2b29 : Sat Mar 11 2000 - 22:27:19 EET