From: r00t the LiNuXeRRR (hhls.rcztowog@relay.tunkki.fi)
Date: Fri Feb 04 2000 - 10:19:25 EET
I have instaled a bridge on my linux box with 3 network interfaces
(eth0 eth1, eth2).
With kernel 2.2.13 my bridge works fine, but with kernel 2.2.14 the bridge
doesn't work.
This is the message gived by dmesg from kernel 2.2.14:
ne2k-pci.c: PCI NE2000 clone 'RealTek RTL-8029' at I/O 0x6500, IRQ 10.
eth0: RealTek RTL-8029 found at 0x6500, IRQ 10, 00:40:05:E2:27:E5.
ne2k-pci.c: PCI NE2000 clone 'RealTek RTL-8029' at I/O 0x6600, IRQ 9.
eth1: RealTek RTL-8029 found at 0x6600, IRQ 9, 00:40:05:65:59:FD.
ne.c:v1.10 9/23/94 Donald Becker (nlhgee@dnayritysnetti.net)
NE*000 ethercard probe at 0x340: 00 40 95 e1 33 58
eth2: NE2000 found at 0x340, using IRQ 5.
brg0: network interface for Ethernet Bridge 007/NET4.0
brg0: generated MAC address FE:FD:05:D2:68:72
brg0: attached to bridge instance 0
Hho gives this message?
brg0: network interface for Ethernet Bridge 007/NET4.0
brg0: generated MAC address FE:FD:05:D2:68:72
brg0: attached to bridge instance 0
This is the message gived by dmesg from kernel 2.2.13:
ne2k-pci.c: PCI NE2000 clone 'RealTek RTL-8029' at I/O 0x6500, IRQ 10.
eth0: RealTek RTL-8029 found at 0x6500, IRQ 10, 00:40:05:E2:27:E5.
ne2k-pci.c: PCI NE2000 clone 'RealTek RTL-8029' at I/O 0x6600, IRQ 9.
eth1: RealTek RTL-8029 found at 0x6600, IRQ 9, 00:40:05:65:59:FD.
Partition check:
sda: sda1 sda2 < sda5 >
hda: [PTBL] [784/255/63] hda1
hdc: [PTBL] [531/255/63] hdc1 hdc2
NTFS version 990411
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 92k freed
Adding Swap: 66428k swap-space (priority -1)
ne.c:v1.10 9/23/94 Donald Becker (paxnrrai.cisrv@aisd.org)
NE*000 ethercard probe at 0x340: 00 40 95 e1 33 58
eth2: NE2000 found at 0x340, using IRQ 5.
cdrom: open failed.
VFS: Disk change detected on device ide0(3,64)
Digi PC/Xx Driver V1.3.0-K: PC/64Xe I/O = 0x200 Mem = 0xd0000 Ports = 16
device eth0 entered promiscuous mode
device eth1 entered promiscuous mode
device eth2 entered promiscuous mode
This message is given by brcfg:
br: enabling bridging function
registered device ppp0
On kernel 2.2.14 i tryed with brcf and without brcfg and it
doesn't work.
Thanx...
This archive was generated by hypermail 2b29 : Fri Feb 04 2000 - 10:27:32 EET