From: Brian J. McCarthy (ndeg.yqqlhkwgnd@bathspa.ac.uk)
Date: Thu Feb 03 2000 - 03:36:18 EET
I have tried to get these serial line added to my Linux machine (RH 6.1 with
2.2.14). I do not understand what the trouble is.
Output from setserial
=========================================================
[root@gateway rc.d]# setserial -gav /dev/ttyS?
/dev/ttyS0, Line 0, UART: 16550A, Port: 0x03f8, IRQ: 4
Baud_base: 115200, close_delay: 50, divisor: 0
closing_wait: 3000, closing_wait2: infinte
Flags: spd_normal skip_test
/dev/ttyS1, Line 1, UART: 16550A, Port: 0x02f8, IRQ: 3
Baud_base: 115200, close_delay: 50, divisor: 0
closing_wait: 3000, closing_wait2: infinte
Flags: spd_normal skip_test
/dev/ttyS2: Device or resource busy
/dev/ttyS3: Device or resource busy
=========================================================
The card I am adding is http://www.siig.com/io/i_o_expander_4s.html.
I am setting port A to 3E8/IRQ4 and port B to 2E8/IRQ3. The unboard Serial
ports are 3F8/IRQ4 and 2F8/IRQ3. This should be the defaul config. Will
interrupt sharing work accross different cards? What could I do to enable
these serial ports ??
Brian McCarthy
N7TUQ
This archive was generated by hypermail 2b29 : Thu Feb 03 2000 - 11:18:07 EET