Re: BRIDGE WITH KERNEL 2.2.14

From: r00t the LiNuXeRRR (terhi.victor@logonet.com)
Date: Tue Feb 01 2000 - 13:20:22 EET

  • Next message: John Ackermann: "Re: Purpose of txtail ?"

             I have instaled a bridge on my linux box with 3 network interfaces
     (eth0 eth1, eth2).
     With kernel 2.2.13 my bridge works fine, but with kernel 2.2.14 the bridge
     doesn't work.
             This is the message gived by dmesg from kernel 2.2.14:
      
     ne2k-pci.c: PCI NE2000 clone 'RealTek RTL-8029' at I/O 0x6500, IRQ 10.
     eth0: RealTek RTL-8029 found at 0x6500, IRQ 10, 00:40:05:E2:27:E5.
     ne2k-pci.c: PCI NE2000 clone 'RealTek RTL-8029' at I/O 0x6600, IRQ 9.
     eth1: RealTek RTL-8029 found at 0x6600, IRQ 9, 00:40:05:65:59:FD.
     ne.c:v1.10 9/23/94 Donald Becker (rwrcy.ztawtaulmw@mbda.gov)
     NE*000 ethercard probe at 0x340: 00 40 95 e1 33 58
     eth2: NE2000 found at 0x340, using IRQ 5.
     brg0: network interface for Ethernet Bridge 007/NET4.0
     brg0: generated MAC address FE:FD:05:D2:68:72
     brg0: attached to bridge instance 0
     
     Hho gives this message?
             
             brg0: network interface for Ethernet Bridge 007/NET4.0
             brg0: generated MAC address FE:FD:05:D2:68:72
             brg0: attached to bridge instance 0
     
     
             
     
              This is the message gived by dmesg from kernel 2.2.13:
     
     ne2k-pci.c: PCI NE2000 clone 'RealTek RTL-8029' at I/O 0x6500, IRQ 10.
     eth0: RealTek RTL-8029 found at 0x6500, IRQ 10, 00:40:05:E2:27:E5.
     ne2k-pci.c: PCI NE2000 clone 'RealTek RTL-8029' at I/O 0x6600, IRQ 9.
     eth1: RealTek RTL-8029 found at 0x6600, IRQ 9, 00:40:05:65:59:FD.
     Partition check:
      sda: sda1 sda2 < sda5 >
      hda: [PTBL] [784/255/63] hda1
      hdc: [PTBL] [531/255/63] hdc1 hdc2
     NTFS version 990411
     VFS: Mounted root (ext2 filesystem) readonly.
     Freeing unused kernel memory: 92k freed
     Adding Swap: 66428k swap-space (priority -1)
     ne.c:v1.10 9/23/94 Donald Becker (ojw.uxxfkq@interport.ne.jp)
     NE*000 ethercard probe at 0x340: 00 40 95 e1 33 58
     eth2: NE2000 found at 0x340, using IRQ 5.
     cdrom: open failed.
     VFS: Disk change detected on device ide0(3,64)
     Digi PC/Xx Driver V1.3.0-K: PC/64Xe I/O = 0x200 Mem = 0xd0000 Ports = 16
     device eth0 entered promiscuous mode
     device eth1 entered promiscuous mode
     device eth2 entered promiscuous mode
             This message is given by brcfg:
     br: enabling bridging function
     registered device ppp0
     
             On kernel 2.2.14 i tryed with brcf and without brcfg and it
     doesn't work.
     
      
     Thanx...
     
     

    This archive was generated by hypermail 2b29 : Tue Feb 01 2000 - 13:22:09 EET