Linux-Hams archive - December 1999: ax25ipd link too Tnos axip ?

ax25ipd link too Tnos axip ?

John Feist (dgpykqc@oo9.ipartners.pl)
Fri, 10 Dec 1999 09:42:34 -0800

Could use some guidance here. I am trying to setup an axip tunnel from a
machine that runs the ax25-utils w/ax25ipd and another machine running
Tnos both machines on the same ethernet segment. The machine with
ax25-utils also hosts a Tnos application and the axip link between the
two Tnos box's works like a charm.

I have read some archives that discussed similar config's and maybe have
a similar problem? On the ax25ipd side I have a unique IP addr, tnc mode
and the master/slave ptypx/ttypx is working properly. The axip link is
pointed too the Tnos machine with a 'aa6qn-* 44.8.0.32'. On the Tnos
machine the axip attach line is: 'attach axip a6ike 256 44.8.4.11 9600
aa6qn2'. I can see the axip link from the Tnos box come in, using the
the Linux node 'L' command, and make a connection to the ax25-util box
but I never get a "Connected" on the Tnos machine on the other end of
the tunnel. I can see both IP addr's from each end. There is no RF
connectivity between these two suites only ethernet.

Thank you in advance for any help provided,
Seasons Greetings too all, John