> in ax25ipd.conf
> socket ip
> mode tnc
> mycall kd4zkw-5
> myaliasn dania5
> beacon after 600
> btext "KD4ZKW-5:DANIA5} kd4zkw.ampr.org [44.98.2.22] AXIP PORT Dania FL"
> device /dev/ttyq0
> speed 9600
> loglevel 0
> param 1 20
> broadcast QST-0 NODES-0
> route ftl 44.98.2.5 bd
from ax25d.conf
[KD4ZKW via vhf]
NOCALL * * * * * * L
default * * * * * * - root /usr/local/sbin/ttylinkd ttylinkd
#
[DANIA via vhf]
NOCALL * * * * * * L
default * * * * * * - root /usr/sbin/node node
#
#
[KD4ZKW via uhf]
NOCALL * * * * * * L
#default * * * * * * - root /usr/local/sbin/ttylinkd ttylinkd
#
[DANIA4 via uhf]
NOCALL * * * * * * L
default * * * * * * - root /usr/sbin/node node
#
[KD4ZKW-5 via axip]
NOCALL * * * * * * L
default * * * * * * - root /usr/sbin/node node
from axports
vhf KD4ZKW 9600 255 2 144.990 MHz (1200 bps)
uhf KD4ZKW-3 9600 255 4 440.975 MHz (1200 bps)
axip KD4ZKW-5 9600 255 5 AXIP Port (9600 bps)
route -n
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use
Iface
209.4.66.7 0.0.0.0 255.255.255.255 UH 0 0 0
ppp0
44.98.2.5 205.152.185.200 255.255.255.255 UGH 0 0 3
tunl0
44.98.2.22 127.0.0.1 255.255.255.255 UGH 0 0 0
tunl0
44.98.2.0 0.0.0.0 255.255.255.0 U 0 0 0
tunl0
127.0.0.0 0.0.0.0 255.0.0.0 U 0 0 58 lo
44.0.0.0 128.54.16.18 255.0.0.0 UG 0 0 0
tunl0
0.0.0.0 209.4.66.7 0.0.0.0 UG 0 0 190
ppp0
All I can think of off hand that might be related.
BTW, the node I'm trying to reach is at 44.98.2.5, and is a tnos
gateway. Still no luck.
He has me configured as DANIA:KD4ZKW-5}
OK, 73
____________________________________________________________
| Curtis D. Levin kd4zkw | fvpj@gicm.net | QRP-L #1488 |
| agxdf@a5.com | http://www.diaisdn.net/user/cdlevin |
| kd4zkw.ampr.org [44.98.2.22] Exp Ax25/Linux DPTNTv1.1a3 |
| amprnet e-mail : terhi.victor@logonet.com |
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~