>
> Hey all. Still having a problem, but fixed the old one
> by changing a routing statement. Now the problem is I
> want to do a nos style node listing for some of my
> neighbors, but we're not on the same frequency. So I
> can connect telnet to them with no problem, but I'd like
> for them to appear in the node list, so I can use a
> 'c' command to connect via the tunl0 driver. Is there
> a way that I can get the ax25-utils to see a node on the
> list that appears with a 'nodes' command, but uses the
> tunl0 driver to connect ? I know that the axip driver
> in tnos takes care of this, but as of yet, I haven't been
> able to make axip connect to anything except the radio
> port. Any help with this is greatly appreciated.
>
OK, here what I have now. I can receive node broadcasts over
the axip port. I see the node, and he sees me, but when we
try to connect, I get nothing.
dania:~# route
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
max3.dialisdn.n * 255.255.255.255 UH 0 0 0 ppp0
kd4zkw.ampr.org * 255.255.255.255 UH 0 0 0 ax2
kd4zkw.ampr.org * 255.255.255.255 UH 0 0 0 tunl0
kd4zkw.ampr.org * 255.255.255.255 UH 0 0 0 nr0
kd4zkw.ampr.org * 255.255.255.255 UH 0 0 0 ax0
w4bkx.ampr.org w4bkx.ampr.org 255.255.255.255 UGH 0 0 2 tunl0
44.98.2.0 * 255.255.255.0 U 0 0 0 tunl0
loopback * 255.0.0.0 U 0 0 9 lo
44.0.0.0 mirrorshades.uc 255.0.0.0 UG 0 0 0 tunl0
default max3.dialisdn.n 0.0.0.0 UG 0 0 209 ppp0
dania:~#
vhf
ax0 Link encap:AMPR AX.25 HWaddr KD4ZKW
inet addr:44.98.2.22 Bcast:192.168.0.255 Mask:255.255.255.0
UP RUNNING MTU:255 Metric:1
RX packets:96 errors:17 dropped:0 overruns:0
TX packets:93 errors:0 dropped:0 overruns:0
uhf
ax1 Link encap:AMPR AX.25 HWaddr KD4ZKW-3
inet addr:44.98.2.22 Bcast:192.168.0.255 Mask:255.255.255.0
UP RUNNING MTU:255 Metric:1
RX packets:669 errors:0 dropped:0 overruns:0
TX packets:5 errors:0 dropped:0 overruns:0
axip
ax2 Link encap:AMPR AX.25 HWaddr KD4ZKW-5
inet addr:44.98.2.22 Bcast:192.168.0.255 Mask:255.255.255.0
UP RUNNING MTU:255 Metric:1
RX packets:33 errors:0 dropped:0 overruns:0
TX packets:25 errors:0 dropped:0 overruns:0
in ax25ipd.conf
socket ip
mode tnc
mycall kd4zkw-5
myaliasn dania5
beacon after 600
btext "KD4ZKW-5:DANIA5} kd4zkw.ampr.org [44.98.2.22] AXIP PORT Dania FL"
device /dev/ttyq0
speed 9600
loglevel 0
param 1 20
broadcast QST-0 NODES-0
route ftl 44.98.2.5 bd
The guy I'm trying to connect to is a tnos box. Is this something to
do with encapsulated slip ? I can't see why though, when I see his
broadcasts clear as day, and he sees my connect requests. What am I
doing wrong here ? I know I'm no expert at this, but this is making
me look like a real idiot, and the guy giving me access to the gate
is losing his patience. Any help is appreciated.
____________________________________________________________
| Curtis D. Levin kd4zkw | rzlzn.zxvdct@mail.dy.fi | QRP-L #1488 |
| zytopci@soyuz.ru | http://www.diaisdn.net/user/cdlevin |
| kd4zkw.ampr.org [44.98.2.22] Exp Ax25/Linux DPTNTv1.1a3 |
| amprnet e-mail : uco@svnr.se |
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~