> Everything on my linux system relative to the linux AX25-HOWTO has now been
> installed and compiled including XFORMS and all is well.
> So I have now started on the next step to activate my KAM+ on vanilla ax25.
> 1) The KAM+ was set to INTFACE KISS
> 2) /etc/ax25/axports as follows:-
> radio1 VK3BCQ 4800 255 2 144.900 Mhz
> 3) /usr/sbin/kissattach /dev/ttyS1 radio1
> 4) /usr/sbin/kissparms -p radio1 -t 100 -s 100 -r 63
>
> Now if I do a "ifconfig" as a check I get the following:
> lo the normal standard
> ax0 Link encap:AMPR AX.25 HWaddr VK3BCQ
> Inet addr:192.168.0.1 Bcast:192.168.0.255 Mask:255.255.255.0
> etc..etc
> I cannot work out where this is coming from.Because as above I have not done a
> "ifconfig ax0.......".I,ve done a check across the system but darned if I
> can find the cause.
> The /usr/bin/call radio1 vk3xxx checks out OK.
> My linux system as hostname of vk3bcq-1.ampr.org 44.136.73.150
> Can someone put me right please
> Have a G'day: John
Change the above to:
> 3) /usr/sbin/kissattach -i 44.136.73.150 /dev/ttyS1 radio1
and in axports change vk3bcq to vk3bcq-1, if you want the ssid to show up.
Bob
--- Bob Nielsen Internet: fldcj@roskapostia.tunk.net Tucson, AZ AMPRnet: qyswtu@246.ne.jp http://www.primenet.com/~nielsen/