I finally got around to trying to configure ax25_call in ax25d.conf. I
saw a message sent back to the user ERROR: unable to bind AX25 to
socket, or something like that.. Sounded like a similar problem to what
the fella below had. was wondering if it's a bug in the code or what. My
configuration is similar as below, except that I'm kiss interfaced to
external tnc's.
On Sun, 18 May 97 03:01:34 +0100 terhi.victor@logonet.com writes:
>Hello all !
>
>Hm, I have problem with using ax25_call. Let me explain my situation:
>I am using kernel 2.1.29 + ax25-utils-2.1.22b and SCC (USCC) card.
>Here is my axports:
>= scc 9A4GL 1200 255 2 144.675 MHz (1200
>bps)
>= ax0 9A4GL-15 9600 255 2 Pipe NODE>FBB
>= ax1 9A4GL-14 9600 255 2 Pipe FBB>NODE
>= ax2 9A4GL-13 9600 255 2 Pipe NODE>BAYBOX
> I thing everybody understand that, but I'll explain: scc is radio
>port, ax0
>and ax1 are linked with kissnetd, to make FBB accessable from node
>(and also
>TNT). There are also second kissnetd runing, one side is kissattached
>to
>kernel on ax2 and second is using by baybox (baycom mailbox). (Don't
>ask me
>why I am running two BBSes on same machine, just for test, but
>maybe....)
> From TNT I can access baybox (9A1CMA) at ax2 without problems. From
>node
>is the same thing, all is ok.
> I have following lines in ax25d.conf:
>= [9A1CMA VIA scc]
>= NOCALL * * * * * * L
>= default * * * * * * - root /usr/sbin/ax25_call ax25_call ax2 %S
9A1CMA
Is this the proper syntax for this command lkine?
>The problem is next, when someone calls 9A1CMA, he got:
>= Connecting to 9A1CMA-0 ...
>= *** Connection timed out - aborting
>ax25_call does'n send SABM to ax2, but to ax0, look my monitor:
>= scc:fm 9A4GL to JAP ctl I00^ pid F0 - 18.05.96 02:13:28
>= c 9a1cma
>= scc:fm 9A4GL-15 to 9A1CMA ctl SABM+ - 18.05.96 02:13:29
>= scc:fm 9A1CMA to 9A4GL-15 ctl UA- - 18.05.96 02:13:29
>= scc:fm 9A1CMA to 9A4GL-15 ctl I00^ pid F0 - 18.05.96 02:13:30
>= Connecting to 9A1CMA-0 ...
>= ax0:fm 9A4GL-15 to 9A1CMA ctl SABM+ - 18.05.96 02:13:30
>= ax1:fm 9A4GL-15 to 9A1CMA ctl SABM+ - 18.05.96 02:13:30
>The problem is that, whatever I specify to port, it call on port ax0.
>When I
>specify undefinared port, it send an error (that is ok).
>Did someone have the same problem ? Is there bug (I don't belive, if
>so many
>people are using it), or I made a misstake ?
>
>Thanks for reading, 73 de Tihomir, frnsfzua@roskapostia.tunk.net
>http://fly.cc.fer.hr/~9a4gl
> /EX
>
ANy help would be appreciated.
Wilson
terhi.victor@logonet.com