Linux-Hams archive - March 1997: Re: ERROR 'ax0' busy and not MOD_IN_USE.

Re: ERROR 'ax0' busy and not MOD_IN_USE.

Jason Smith (nvyehcu.snayfqex@dada.it)
Wed, 5 Mar 1997 14:18:05 -0600 (CST)

> Unless things have changed, try doing a "setserial /dev/xxx callout_nohup"
> on the serial port that you are connecting to. The TNC, when in kiss mode,
> flashes DCD once for each valid packet received. If you have a full RS-232
> cable attached that passes DCD through then this causes a hangup. At least
> that's what happened to me running a 2.0 kernel with a Paccomm TINY-2.
>
> Please let me (us) know if this works.
>
> /a
> PS: Depending on your kernel packaging, you may find an /etc/rc.d/rc.serial
> that has setserial commands in it.....
>

I had tried this before, but just in case I tried it again, however, it
still gives the same error. I am almost to the point of going back over
everything that I have done so far to see if I made a mistake. I don't
know what the problem could be. I may try to find any differences between
my system at home and the W5AC system that I am trying to install this
on.

Thanks
Jason

-- 
<fsmjbre@siwertell.com>
... Slave programmer ... Send help please!! :-) ...