I have an ugly problem with ax25d or something else.
I am unable to resolve it and need your help.
For your information:
Linux 2.0.23 and ax25-utils-2.0.12c.
I have two modems on two slip-ifaces.
axports:
9k6 DG8XT-7 19200 255 4 radio
1k2 DG8XT-0 19200 255 2 radio
nrports:
netrom DG8XT-9 #HH54 235 Net/Rom-Link
ax25d.conf:
[9k6]
parameters 7 10 2 900 10 15
NOCALL * * * * * * L
default * * * * * * - afuadm /usr/local/sbin/a-sh a-sh %u
#
[1k2]
parameters 7 10 2 900 10 15
NOCALL * * * * * * L
default * * * * * * - afuadm /usr/local/sbin/a-sh a-sh %u
#
<netrom>
parameters 7 100 10 * 10 5
#
NOCALL * * * * * * L
default * * * * * * - afuadm /usr/local/sbin/a-sh a-sh %u
/usr/sbin/axattach -i 44.130.0.118 /dev/ttyS1 9k6
/usr/sbin/axattach -i 44.130.0.118 /dev/ttyS2 1k2
/usr/sbin/nrattach -i 44.130.0.118 netrom
To connect out over 1k2, 9k6 and netrom there is no problem.
tcp/ip within mode datagram also, but incoming ax25-connections.
The ax25d answered with an 'UA' and after this the trouble is
going on. Sometimes the little programm 'a-sh' ist startet and
somtimes not.
I have change it to start an another program like node, but that
makes no differences.
If I only run with one tnc (9k6 and netrom) or (1k2) all
works fine, but if I am running with twice, then I have
the problem.
The strange is, that I can boot and over '9k6' all works fine,
and over '1k2' nothing happend without the 'UA'. Then I
reboot again and it is the same, or '1k2' works well and
'9k6' seems to be sick. Outgoing-connects over 1k2, 9k6,
netrom will ever work.
Any hints ?
Thanks in advance your help,
Tom (krt.crxpucq@trib.com),