> talking to them on, but only while running netrom. If netrom was not
> attached, hardware addresses were resolved fine. I don't, and don't
> want to,
> run ip _over_ netrom, so why would I configure an ip address on the
> netrom interface (nr0) ? Well it seems if I don't, It causes the
> aforementioned
> arp problem.
>
> Anyone else seen this ??
Yes I seem to remember seeing something odd like this a while ago...
ofcourse my memory could be failing me, but I am sure that Jonathan said
that there was intention to automatically assign some IP address to the nr
port...
In short just configure it with the same IP address as your ax0 port - goes
against the grain of having an IP number per port... but then just don't do
and ifconfig and look at the port :-)
73
-- + David J Brown, G7PIT Leicester, England. Packet: g7pit@gb7mbb.#16.gbr.eu + + Internet/Amprnet email: ubtkmwa.llubpwqb@mailit.tunk.net Telephone: 0976 687217 + + Web: http://www.m1aax.ampr.org Amprnet Node: telnet://m1aax.ampr.org +