From: Ian Templeton (nhckzm.mmoep@nemko.no)
Date: Sun Jul 30 2000 - 17:03:05 EEST
Hi Robert,
Assuming your telnet port is port 2, forward file should have something
like:-
A <CALLSIGN>
*
P B
*
C C <call> <address> <port>
V .<login call>$W$W<login password$W
HTH!
regards,
Ian GM0JQE
Sysop GB7AYR
pva.kyaiy@radiotele.no
psuqd@rotterdam.nl
GM0JQE@GB7AYR.#78.GBR.EU
----- Original Message -----
From: "Robert" <terhi.victor@logonet.com>
To: <vprxr.rmdpyjwaat@drunkenwhores.com>
Sent: Saturday, July 29, 2000 1:49 PM
Subject: [fbb] BPQ and FBB For Forward via telnet..
> Hi, i am using winfbb, i have one BPQ port with a baycom modem.
> In winfbb i have two ports setup, one is the bpq port and the other is a
> telnet port.
> Another station can connect to me fine through the telnet port, but i cant
> seem to get to the telnet port from connecting via the forward file.
>
> If i go into the gateway in winfbb and and select port 2 (telnet port)
then
> type the connect string and it will connect to the other station fine.
> >From the forward file i type
> c 2 <call> <ip address> <port>
> I beleive this is right as i dont need to connect to switch to get to the
> fbb port 2....
> any help appreciated :)
> 73
> Robert
>
>
>
>
> _______________________________________________
> fbb maillist - qgd@wlan.jku.at
> http://www.f6fbb.org/mailman/listinfo/fbb
>
_______________________________________________
fbb maillist - shqwpbq.soxev@mail.dy.fi
http://www.f6fbb.org/mailman/listinfo/fbb
This archive was generated by hypermail 2b29 : Sun Jul 30 2000 - 17:12:08 EEST