From: Shane Deering (drfl@rele.tunk.net)
Date: Sat Apr 29 2000 - 03:28:31 EEST
----- Original Message -----
From: "Beau Thompson" <sfb@pbarch.com>
To: <tjp.atcidqjd@accpac.com>
Sent: Saturday, April 29, 2000 9:14 AM
Subject: [fbb] nead help
> Hello All: I am working on a bbs running winfbb 700g25 and bpq408a.
> The problem I am running into is with the node software, what is
> happening is if you try to connect to any station on our node list by
> just typing in either the alias or the callsign for example If you type
> in c flgate which is one of our bbs systems it connects fine, the
> problem is once you tell the system goodbye the node says it is
> disconnect but the other system never receives a disconnect frame. If
> you type in the same thing but this time after the c put the port number
> which is 3 the system will connect and disconnect fine. I am not sure
> way it will not send a disconnect frame if you let the node do it's own
> routing. Any ideas will be appreciated on how to fix this problem.
> tnx n9mfk
Netrom nodes will stay connected at the ax25 level after they disconnect at
the netrom level.
That is normal for netrom nodes. If that is your problem then you have
nothing to worry about.
They will disconnect at the ax25 level after a preset time (say 15 minutes)
if no netrom traffic is passed. If they aren't disconnecting at the netrom
level, then you have a problem that I haven't
seen before. I'm running the same software here.
-- Shane DeeringEMAIL ltt@rb.cz http://www.qsl.net/vk3bvp/index.htm
_______________________________________________ fbb maillist - terhi.victor@logonet.com http://www.f6fbb.org/mailman/listinfo/fbb
This archive was generated by hypermail 2b29 : Sat Apr 29 2000 - 03:41:53 EEST